Ironmaster's Challenge 50K Race Report - 2014

If you took a peek at my training schedule this spring, it would have been obvious that the Ironmaster's Challenge 50K was my first "A Race" of the 2014 season.  As is very often the case however, things don't go as planned.  Despite not having the best training going into the race, KNOWING this fact on race day was critical in ensuring a fun, albeit painful outing in the PA Woods.

The start and end point of the Ironmaster's is Pine Grove Furnace State Park, right where the Appalachian Trail passes thru.  It's located in a valley so you can bet on some good climbs during the course of 30+ miles in this region.

If you think of it like a half pipe, the 50K course starts at the bottom of the "U", goes up one side, down, then up the other, down, then up the first side and finishes back down at the bottom of the "U".  For a detailed visual on what I'm referring to, please see my amazing handy work using the hugely under-rated Snipping Tool from our friends in Redmond.

Bad-ass drawling skills

There's pretty technical (class 2-3) climbing and questionable "trails" for the first 2 miles, ending at a gorgeous viewpoint known as Sunset Rocks where some backpackers had positioned themselves for a rude awakening on a Sunday morning.

Living within 15 minutes of the race definitely gave me an advantage knowing what was in store for the first few miles.  Thankfully, I was smart about it and took it conservatively out of the gate through mile 4 or 5.  If I hadn't, it would have been a much less enjoyable day.

I'm not going to be dramatic about the whole thing though...other than getting lost several times and just being unprepared (training wise), things went really well.  No stomach issues, no injuries, I made some new friends, caught up with some old ones, and managed to capture a good chunk of the adventure on video!

And finally, there are certain aspects of every race (that charges an entry fee) that are pretty much expected: some sort of swag item, a bib, course markings, etc.  This final section is meant to highlight areas where the race went above and beyond expectations, as well as where it fell short.  This is a new section for my race reports, but I think I'd like to give it a name.  Something like "Buzz Lightyear and The Sloth"....we'll see if that sticks.

Buzz Lightyear
- Post race celebrations and atmosphere.  Full on meal + free beer = WIN!  Plus having it right at the "L-shaped" mansion with a bunch of picnic tables so everyone can hang out and cheer on the finishers was very nicely done.
- Results were up on Pretzel City Sports within 24 hours!  Without chip timing!
- Nice, classy tech shirts with a unique color, but not overly loud

The Sloth
- The course was marked really well in some places, and quite poorly in others. Almost everyone I talked to post-race had described at least one incident in which they were lost (personally, I veered off course twice).   Runners don't need markings every few feet, but we DO need them clearly at EVERY possible intersection! Even faint side trails! Just put one little flag on the course just after the intersection to let the runner know they're still on the right track and there is one less thing to worry about.
- Aid stations weren't as well stocked as some other ultras I've run with around the same turnout. This wasn't a big deal though, and I'll let it slide a bit cause the post race grub was nice :)
- Mile Markers 22 - 25 were wrong. 22 should have been 23 and 26 didn't exist. Now that I'm writing this, it really seems trivial, but in the mind of a runner who's been out there for 5+ hours, it's a HUGE difference between being at mile 24 or 25.

Training leading up to the race:
  Monday: rest
  Tuesday: brief 1.5 mile recovery run
  Wednesday: 11 easy trail miles
  Thursday: Commute on bike (8 miles total)
  Friday: rest
  Saturday: 2 mile flat hike

Race Gear List:
  Buff
  Race Shirt from the Philadelphia Half
  GoLite Mesa Shorts
  Darn Tough Vermont Socks
  Hoka One One Stinson Trail
  Ultimate Direction SJ Vest 1.0
  Garmin Fenix
  RoadID
  Garmin Virb Elite Action Camera
  DIY Monopod

Race Nutrition:
  Greek Yogurt, Cornbread, and Coffee for Breakfast
  Water refills at almost every stop
  Clif-type bars or Stinger gels roughly every 30-45 minutes
  About 1 SaltStick pill per hour as I felt cramping coming on
  Questionable orange-drink at one aid station

Buck Ridge Burn Trail 1/2 Marathon Race Report 2014

Being literally 15 minutes drive from my front door and in the scenic Michaux State Forest, I had no excuses not to run this race.

The Buck Ridge Burn half marathon and 5K was held on a gorgeous spring morning on 4/6/14.  Beginning and ending right at the Appalachian Trail Museum and the adjacent Pine Grove Furnace, you couldn't ask for a prettier setting in the South Mountain Region.

Courtesy: www.cnyhiking.com

Now in its 4th year, RD's Bill Bechtel and Jennifer Henry put on the perfect, low-key trail running event with help from an army of well-trained volunteers.

Appalachian Running Company served as the headquarters for all pre-race packet pickups and such on the Saturday prior.  I'd like to note that walking in the door at 9:04AM, I had the honor of being the first to pick up their packet! (Pretty sure that deserves a selfie high-five)

I had a few friends run this race last year and enjoyed it, but I had no idea I was in for such a treat.

Training during my "layover" week between half marathons was few and far between, and had no intentions of putting in much mileage because of how hard I pushed the second half of The LOVE Run, sustaining speeds I'm just not used to doing recently.  This lack of mileage was also due in part to the constant rain we received here in Central PA that week.  Said rain set us up for a wet and muddy run for the Buck Ridge Burn...just enough to make it fun!

Plenty of mud out there today!

With countless stream crossings, varied scenery and terrain, this race is great for the seasoned trail runner or people looking for a good running adventure.  I would not recommend this run for road runners uncomfortable with sketchy footing for hours on end.  To see a good example of what I'm talking about, see around the 2:00 minute mark of my video posted below.

You got a little something on your cheek...

I wish I had more photos to share, but the video took up all my attention!

And finally, there are certain aspects of every race (that charges an entry fee) that are pretty much expected: some sort of swag item, a bib, course markings, etc.  This final section is meant to highlight areas where the race went above and beyond expectations, as well as where it fell short.  This is a new section for my race reports, but I think I'd like to give it a name.  Something like "Buzz Lightyear and The Sloth"....we'll see if that sticks.

Buzz Lightyear

- Plentiful aid stations for only a half marathon distance with tons of fruit and other sweet treats, gels, and various liquids
- Speaking of food, the post-race spread was great! (see video)
- Price: it was only 40 bucks.
- Extremely well marked course
- Lastly, and most impressive...Results were up on Ultrasignup the same day!  Without chip timing!

The Sloth

- I would prefer a higher resolution course map on the website (such as MapMyRun or Garmin Connect) so individuals who live closeby can get out on the course prior to race day.  Or if seeing the actual course isn't an option, have a better idea of elevation and terrain so they can do some race-specific training wherever they live.

Training leading up to the race:
  Monday: 4 mile hike
  Tuesday: Rest
  Wednesday: 7 miles moderate on BRB course
  Thursday: Rest
  Friday: Rest
  Saturday: Rest

Race Gear List:
  Buff
  Race Shirt from the Frederick Half
  GoLite Mesa Shorts
  Feetures Men's Light Cushion Quarter Socks
  Brooks PureGrit
  HTC One
  Spibelt
  Garmin Fenix
  RoadID
  Garmin Virb Elite Action Camera
  DIY Monopod

Race Nutrition:
  Banana, Nature Valley Bar, and Coffee for Breakfast
  Water @ every stop
  About 4 Power Bar chews around mile 7

Philly LOVE Run Half Marathon Video!

So I made a video!  It's my first one that actually includes some editing, so bear with me while I learn!  It's been fun shooting and editing and I look forward to doing more to share.  Enjoy!

DIY Trekking Pole + StickPic Monopod

So I've been playing around with the Garmin Virb quite a bit over the past couple of weeks.  Various mounting options and techniques have been explored, shot down and tweaked.  The latest iteration is a Franken-mount of sorts, in an effort to save on weight, cost, and most importantly, meet my specific needs as a runner and hiker.

Requirements:

- Reuse as many materials on hand as possible

- As lightweight as possible (within reason) without sacrificing function

- Usable in all-weather conditions

- Versatile, and usable in various action shooting scenarios

Materials:

- One Trekking Pole ($40 for pair, already own 2 pairs of this model)

- One #2 The Stick Pic ($14 + S/H)

- Garmin Virb Cradle (comes with Garmin Virb Elite)

- Garmin Virb Tripod Mount ($10)

- Tennis Racket Grip Wrap ($4 @ Target)

- About a foot of duct tape

Step 1: Remove any baskets and dirt

Step 2: Twist (or flip, depending on model) to unlock lowest section of pole and remove

Step 3: (For twist-lock poles only) Screw down expanding mechanism to lock in place and apply duct tape to secure all moving parts.

Step 4: Wrap "handle" section (opposite of pole tip) with tennis racket wrap.  Secure according to wrap instructions.

Now if you have the StickPic with any other camera, you're pretty much done and can essentially wiggle the StickPic onto the tip of your new creation, mount your camera and go to town!  For the final steps regarding my engineering escapades...read on!

Step 5:  Secure the Virb Cradle --> Tripod Mount  --> StickPic

Step 6: Twist StickPic onto tip end of pole!

Step 7:  Go record some videos of you and your friends doing some cool shit!

Of course, this whole process wouldn't be any fun if I didn't record a video using this new toy...so here you go:

Some final notes:

- I didn't "kill" the trekking pole; it was simply taken apart and some tape applied.  If I need to reassemble to create a complete pair of poles, it'll only take about 5 minutes.

- The monopod is not telescoping.  I can use the other trekking pole for this, plus I wanted to shave weight for use while running (8.5 oz less)

- One could argue that the cost makes absolutely no sense because you can find a similar product online for a reasonable price, but I'm certain my product is of higher quality, plus recycles/repurposes items that I already own.

- With the Virb weighing in at 6.4oz, the entire rig is only 10.9oz...not too shabby!

Happy Customer